Oracle EXADATA X5-2 - Page 156

Install the Motherboard Assembly
b.
Using a No. 2 Phillips screwdriver, tighten the four green captive screws that
secure the mid-wall to the bottom of the chassis [3].
c.
Using a No. 2 Phillips screwdriver, insert and tighten the screw on each side
of the chassis to secure the mid-wall in the chassis [4].
4.
Reconnect the power cable to the motherboard from the rear storage drive
backplane [5].
See “Servicing the Storage Drive Backplanes” on page 112.
156 Oracle Exadata Storage Server X5-2 High Capacity Service Manual • January 2018