4.4.5 Time Adjust Settings
This screen
allows you to enable automatic clock adjustment using an NTP server and configure the settings
for DST (Daylight Saving Time), also known as Summer Time.
4.4.5.1 Synchronization
Enable Synchronization by NTP
Description Selects whether to enable the unit to automatically adjust its clock
according to the time information provided by an NTP server.
Value Range
• Yes
• No
Note
• Even if you select [Yes], this feature will not function properly
if the NTP server address setting is invalid.
Default Value Yes
Synchronization Interval
Description Specifies the interval, in seconds, between synchronizations with the
NTP server.
Value Range 10–86400
Default Value 43200
100 Administrator Guide Document Version 2013-03
4.4.5 Time Adjust Settings
To Next Page
Loading...
