Panasonic KX-UT123

Configuration File Reference VLAN_PRI_PC (Page 197)
4.3.3 IEEE802.1X Settings (KX-UT248 only)
This screen allows you to configure settings relating to the IEEE 802.1X networking protocol.
4.3.3.1 IEEE802.1X Settings
Enable IEEE802.1X
Description Selects whether to use the IEEE 802.1X protocol.
Note
• You should specify "Yes" for only one of "LLDP", "VLAN" or
"IEEE8021X".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "
IEEE8021X" > "VLAN"
> "LLDP". Therefore, if "Yes" is specified for both "VLAN" and
"LLDP", the VLAN-related settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference IEEE8021X_ENABLE (Page 198)
86 Administrator Guide Document Version 2013-03
4.3.3 IEEE802.1X Settings (KX-UT248 only)