Panasonic KX-UT123

# DTMF will be sent through SDP, according to RFC 2833
OUTBANDDTMF_1="Y"
############################################################
# Call Control Settings #
############################################################
# Enables subscription to the Voice Mail server
VM_SUBSCRIBE_ENABLE="y"
# Shared Call Settings
SHARED_CALL_ENABLE_1="Y"
# Disables Do Not Disturb, Call Forward synchronization.
FWD_DND_SYNCHRO_ENABLE_1="N"
D
2.6 Setting Configuration File Parameters Using
TR-069
TR-069 (Technical Report 069) is a protocol for the remote management of terminals using the technical
specifications of CWMP (CPE [Customer Premises Equipment] WAN Management Protocol). TR-069 allows
terminals
to have their settings configured automatically via connection to ACSs (Auto Configuration Servers).
For details about setting up the parameters necessary for using TR-069, see 4.7.4 Management Server and
5.3.6 Management Server Settings.
Notice
• Settings that are configured using TR-069 can also be configured using the standard configuration file.
Therefore, take care that settings do not overlap when using both configuration methods together.
Settings configured using TR-069
Requirement
Parameter Name
Ref.
TR-069 Parameter Configuration File Parameter
TR-106 Device.Time.NTPServer1
NTP_ADDR
Page 201
TR-106 Device.Time.LocalTimeZone
LOCAL_TIME_ZONE_POSIX
Page 175
TR-106 Device.ManagementServer.URL
ACS_URL
Page 187
TR-106 Device.ManagementServer.Username
ACS_USER_ID
Page 187
TR-106 Device.ManagementServer.Password
ACS_PASS
Page 187
TR-106 Device.ManagementServer.PeriodicInfo
rmEnable
PERIODIC_INFORM_ENABLE
Page 187
TR-106 Device.ManagementServer.PeriodicInfo
rmInterval
PERIODIC_INFORM_INTERVAL
Page 188
TR-106 Device.ManagementServer.PeriodicInfo
rmTime
PERIODIC_INFORM_TIME
Page 188
50 Administrator Guide Document Version 2013-03
2.6 Setting Configuration File Parameters Using TR-069