No Answer (Phone Number)
Description Specifies the phone number of the destination to forward calls to when
a call is not answered after it has rung a specified number of times.
Note
• If you
change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range Max. 32 characters
Note
• You cannot leave this field empty if [No Answer (Enable Call
Forward)] is set to [Yes].
Default Value Not stored.
No Answer (Ring Count)
Description Specifies the number of times that an incoming call rings until the call
is forwarded.
Note
• If you
change this setting when [Synchronize Do Not Disturb
and Call Forward] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range 0, 2–20 (0: No ring)
Default Value 3
134 Administrator Guide Document Version 2013-03
4.6.2 Call Control [Line 1]–[Line x]
To Next Page
Loading...
