Default Value Current firmware version
4.2.2 Network Status
This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.
Clicking [Refresh] updates the information displayed on the screen.
4.2.2.1 Network Status
MAC Address
Description Indicates the MAC address of the unit (reference only).
Value Range Not applicable.
Default Value Default MAC address (example: 0080F0ABCDEF)
Ethernet Link Status (LAN Port)
Description Indicates the current connection status of the Ethernet LAN port
(reference only).
Value Range
• Connected
• Not connected
Default Value Not applicable.
Ethernet Link Status (PC Port) (KX-UT123/KX-UT133/KX-UT136/KX-UT248
only)
Description Indicates the current connection status of the Ethernet PC port
(reference only).
Document Version 2013-03 Administrator Guide 73
4.2.2 Network Status
To Next Page
Loading...
