Note
• After the firmware has been successfully updated, the unit will restart automatically.
4.7.2.1 Local Firmware Update
Encryption
Description Selects whether the firmware files are encrypted or not.
Value Range
• Yes
• No
Default Value Yes
File Name
Description Specifies the path of the firmware file to be imported.
Value Range No limitation
Note
• There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths
may cause longer data transfer times and result in
an internal error.
Default Value Not stored.
4.7.3 Provisioning Maintenance
This screen allows you to change the provisioning setup to download the configuration files from the
provisioning server of your phone system.
148 Administrator Guide Document Version 2013-03
4.7.3 Provisioning Maintenance
To Next Page
Loading...
