Panasonic KX-UT123

ADD_TRANSPORT_UDP_n
Parameter Name Example ADD_TRANSPORT_UDP_1, ADD_TRANSPORT_UDP_2, …,
ADD_TRANSPORT_UDP
_6
Value Format Boolean
Description Specifies whether to add the attribute "transport=udp"
to
the SIP header
URI.
Value Range
• Y (Add Transport UDP)
• N (Do not add Transport UDP)
Default Value
N
ADD_EXPIRES_HEADER_n
Parameter Name Example ADD_EXPIRES_HEADER_1, ADD_EXPIRES_HEADER_2, …,
ADD_EXPIRES_HEADER
_6
Value Format Boolean
Description Specifies whether to add an "Expires" header to REGISTER (adds an
"expires" parameter to the "Contact" header).
Value Range
• Y (Add Expires Header)
• N (Do not add Expires Header)
Default Value
Y
SIP_HOLD_HOLDRECEIVE_n
Parameter Name Example SIP_HOLD_HOLDRECEIVE_1, SIP_HOLD_HOLDRECEIVE_2, …,
SIP_HOLD_HOLDRECEIVE
_6
Value Format Boolean
Description Specifies whether to allow re-INVITE for calls on hold.
Value Range
• Y (Enable SIP Hold Receive)
• N (Disable SIP Hold Receive)
Default Value
Y
SIP_ADD_DIVERSION_n
Parameter Name Example SIP_ADD_DIVERSION_1, SIP_ADD_DIVERSION_2, …,
SIP_ADD_DIVERSION
_6
Value Format Integer
Description Specifies whether to add Diversion header information.
Document Version 2013-03 Administrator Guide 267
5.7.2 SIP Settings