Panasonic KX-UT123

Resource List URI
Description Specifies the Uniform Resource Identifier string for the resource list,
which consists of "sip:", a user part, the "@" symbol, and a host part,
for example, "sip:user@example.com".
For details, refer to RFC 4662.
Note
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com"
in the example above) can contain up to 127 characters.
• When
the BLF feature is assigned to a flexible button, it may be
necessary to specify this parameter depending on your phone
system. For details about flexible buttons, see 6.3 Flexible
Buttons (KX-UT133/KX-UT136/KX-UT248 only).
Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
Default Value Not stored.
Configuration File Reference RESOURCELIST_URI_n (Page 244)
4.6.2.2 Dial Plan
Dial Plan (max 1000 columns)
Description Specifies a dial format, such as specific phone numbers, that control
which numbers
can be dialed or how to handle the call when making a
call. For details, see 6.2 Dial Plan.
Value Range Max. 1000 characters
Note
• Entering more
than 1000 characters in this field causes an error
and the previous value remains effective.
Default Value Not stored.
Configuration File Reference DIAL_PLAN_n (Page 242)
Call Even If Dial Plan Does Not Match
Description Selects whether to make a call even if the dialed number does not
match any of the dial formats specified in [Dial Plan].
Document Version 2013-03 Administrator Guide 129
4.6.2 Call Control [Line 1]–[Line x]