Panasonic KX-UT123

– You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255
", or "127.0.0.1".
• FQDN field
– The field cannot contain ", &, ', <, >, or trailing spaces.
– You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
– You cannot enter invalid IP addresses, for example, "0.0.0.0", "255.255.255.255", or "127.0.0.1".
• Authentication ID/Password field
– The field cannot contain ", &, ', :, <, >, or space.
– The length of user password and administrator password must be from 6 to 16 characters.
• Display Name field (® see [Display Name] in 4.6.2.1 Call Control)
– This is the only field in which you can enter Unicode characters.
Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
Result Message Description Applicable Screens
Complete The
operation has successfully completed. All screens except
4.6.7 Export Phonebook
Failed (Parameter Error) The operation failed because:
• Some specified
values are out of range
or invalid.
All screens
Failed (Memory Access
Failure)
The operation failed because:
• Access error to the flash memory
occurred while reading or writing the
data.
All screens
Failed (Transfer Failure)
*1
The operation failed because:
• A network error occurred during the
data transmission.
All screens
Failed (Busy) The operation failed because:
• The unit is in an operation that
accesses
the
flash memory of the unit.
All screens
• When attempting to import/export the
phonebook data, the unit is on a call.
• While transferring
the phonebook data,
a call arrived at the unit.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
• When
updating the firmware, the unit is
on a call.
4.7.2 Local Firmware
Update
Failed (Canceled) The operation failed because:
• While
transferring
the phonebook data,
IP Reset was performed on the unit.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
• While transferring the firmware file, IP
Reset was performed on the unit.
4.7.2 Local Firmware
Update
• While transferring the phonebook data,
the connection with the unit was
interrupted.
4.6.6 Import Phonebook
4.6.7 Export Phonebook
26 Administrator Guide Document Version 2013-03
1.1.6 Web User Interface Programming