STUN_2NDSERV_ADDR
Value Format String
Description Specifies the IP address of the secondary STUN server.
Note
• This setting is available only when "STUN_SERV_ADDR" is
specified in IP address notation.
Value Range IP address in dotted-decimal notation
Default Value Empty string
STUN_2NDSERV_PORT
Value Format Integer
Description Specifies the port number of the secondary STUN server.
Value Range 1–65535
Default Value 3478
5.4.8 Miscellaneous Network Settings
NW_SETTING_ENABLE
Value Format Boolean
Description Specifies whether to enable the network settings from the unit.
Note
• If you
change this setting to "N" when the network settings (with
the exception of "HOST_NAME") in 5.4.1 IP Settings have been
made through Web user interface programming, clear these
settings once by performing Reset Web Settings from the Web
user interface, and then change this setting to "N".
Value Range
• Y (Enable network settings)
• N (Disable network settings)
Default Value
Y
CUSTOM_WEB_PAGE
Value Format Integer
Description Specifies whether to enable the settings in 4.3.1 Basic Network
Settings
and 4.4.5
Time Adjust Settings from the Web user interface
when logged in with the User account.
Document Version 2013-03 Administrator Guide 203
5.4.8 Miscellaneous Network Settings
To Next Page
Loading...
