Value Range
• Y (Add Rport [RFC 3581])
• N (Do not add Rport [RFC 3581])
Default Value
N
Web User Interface Reference Supports Rport (RFC 3581) (Page 114)
SIP_REQURI_PORT_n
Parameter Name Example SIP_REQURI_PORT_1, SIP_REQURI_PORT_2, …,
SIP_REQURI_PORT
_6
Value Format Boolean
Description Specifies whether to add the port parameter to the Request-Line
in
the
initial SIP request.
Value Range
• Y (Add the port parameter)
• N (Do not add the port parameter)
Note
• Request URI in REGISTER example:
– If set to "Y", the port parameter is added to the
Request-Line, as follows:
Request-Line: REGISTER sip:192.168.0.10:5060 SIP/2.0
– If set to "N", the port parameter is not added to the
Request-Line, as follows:
Request-Line: REGISTER sip:192.168.0.10 SIP/2.0
Default Value
Y
SIP_SUBS_EXPIRE_n
Parameter Name Example SIP_SUBS_EXPIRE_1, SIP_SUBS_EXPIRE_2, …,
SIP_SUBS_EXPIRE
_6
Value Format Integer
Description Specifies the length of time, in seconds, that the subscription remains
valid. This value is set in the "Expires
" header of the SUBSCRIBE
request.
Value Range 1–4294967295
Default Value 3600
SUB_RTX_INTVL_n
Parameter Name Example SUB_RTX_INTVL_1, SUB_RTX_INTVL_2
, …, SUB_RTX_INTVL_6
Value Format Integer
260 Administrator Guide Document Version 2013-03
5.7.2 SIP Settings
To Next Page
Loading...
