RTCP_INTVL_n
Parameter Name Example RTCP_INTVL_1, RTCP_INTVL_2, …, RTCP_INTVL_6
Value Format Integer
Description Specifies the interval, in seconds, between RTCP packets.
Value Range 5–65535
Default Value 5
Web User Interface Reference RTCP Interval (Page 118)
MAX_DELAY_n
Parameter Name Example MAX_DELAY_1, MAX_DELAY_2, …, MAX_DELAY_6
Value Format Integer
Description Specifies the maximum delay, in 10-millisecond
units,
of the jitter buffer.
Value Range
3–50 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than "NOM_DELAY"
– This value must be greater than "MIN_DELAY"
– "NOM_DELAY" must be greater than or equal to
"MIN_DELAY"
Default Value 20
Web User Interface Reference Maximum Delay (Page 118)
MIN_DELAY_n
Parameter Name Example MIN_DELAY_1, MIN_DELAY_2, …, MIN_DELAY_6
Value Format Integer
Description Specifies the minimum delay, in 10-millisecond
units,
of the jitter buffer.
Value Range
1 or 2 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be less than or equal to "
NOM_DELAY"
– This value must be less than "MAX_DELAY"
– "MAX_DELAY" must be greater than "NOM_DELAY"
Default Value 2
Web User Interface Reference Minimum Delay (Page 118)
236 Administrator Guide Document Version 2013-03
5.6.2 RTP Settings
To Next Page
Loading...
