Panasonic KX-UT123

Value Range Max. 500 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 128 characters.
– "<password>" must be less than 128 characters.
– "<user>:<password>@" may be empty.
– The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
– ":<port>" can be omitted if you do not need to specify the
port number.
• If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower
-case.
• If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
• If this URL ends with "/" (slash), "Config{mac}.cfg" is
automatically added at the end of the URL.
For example, CFG_STANDARD_FILE_PATH="http://
host/dir/" becomes
CFG_STANDARD_FILE_PATH="http://host/dir/
Config{mac}.cfg".
Default Value http://provisioning.e-connecting.net/redirect/conf/{mac}.cfg
Web User Interface Reference Standard File URL (Page 149)
CFG_PRODUCT_FILE_PATH
Value Format String
Description Specifies the URL of the product configuration file, which is used when
all units with the same model number need the same settings.
Note
• When you change this setting, set "PROVISION_ENABLE" to
"Y" at the same time.
Document Version 2013-03 Administrator Guide 181
5.3.5 Provisioning Settings