Panasonic KX-UT123

DNS2_ADDR
Value Format String
Description Specifies the IP address of the secondary DNS server for your phone
system dealer.
Value Range IP address in dotted-decimal notation
Default Value Empty string
5.4.3 Ethernet Port Settings
VLAN_ENABLE
Value Format Boolean
Description Specifies whether to use the VLAN feature to perform VoIP
communication securely.
Note
• This setting is available only when "NW_SETTING_ENABLE" is
set to "
N".
• You should specify "Y" for only one of "LLDP_ENABLE",
"VLAN_ENABLE", or "IEEE8021X_ENABLE".
If "Y" is specified for two or more of the parameters above, the
settings are prioritized as follows: IEEE8021X_ENABLE >
VLAN_ENABLE > LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the
VLAN-related settings are used.
Value Range
• Y (Enable)
• N (Disable)
Default Value
N
Web User Interface Reference Enable VLAN (Page 84)
VLAN_ID_IP_PHONE
Value Format Integer
Description Specifies the VLAN ID for this unit.
Note
• This setting is available only when both
"NW_SETTING_ENABLE" and "IEEE8021X_ENABLE"
(KX-UT248 only) are set to "N".
Value Range 1–4094
Default Value 2
Web User Interface Reference IP Phone (VLAN ID) (Page 85)
196 Administrator Guide Document Version 2013-03
5.4.3 Ethernet Port Settings