4.2.1 Version Information
This screen allows you to view the current version information such as the model number and the firmware
version of the unit.
4.2.1.1 Version Information
Model
Description Indicates the model number of the unit (reference only).
Value Range Model number
Default Value Current model number
Operating Bank
Description Indicates the storage area of the firmware that is currently operating
(reference only).
Value Range
• Bank1
• Bank2
Default Value Not applicable.
IPL Version
Description Indicates the version of the IPL (Initial Program Load) that runs when
starting the unit (reference only).
Value Range IPL version ("nn.nn" [n=0–9])
Default Value Current IPL version
Firmware Version
Description Indicates the version of the firmware that is currently installed on the
unit (reference only).
Value Range Bank1 (Bank2): Firmware version ("nn.nnn" [n=0–9])
72 Administrator Guide Document Version 2013-03
4.2.1 Version Information
To Next Page
Loading...
