Label Name (No. 1–24)
Description Specifies the message to be displayed on the screen when the flexible
button is pressed.
Value Range Max. 10 characters
Note
• You can use Unicode characters for this setting.
Default Value For KX-UT133/KX-UT136:
Not stored.
For KX-UT248:
No. 1: 1, No. 2: 2, No. 3: 3... No. 24: 24
Configuration File Reference FLEX_BUTTON_LABELx (Page 228)
4.6.4 Tone Settings
This screen allows you to configure the dual-tone frequencies and ringtone patterns of each tone.
4.6.4.1 Dial Tone
Tone Frequencies
Description Specifies the dual-tone frequencies,
in hertz, of dial tones using 2 whole
numbers separated by a comma.
136 Administrator Guide Document Version 2013-03
4.6.4 Tone Settings
To Next Page
Loading...
