Panasonic KX-UT123

IP Phone (VLAN ID)
Description Specifies the VLAN ID for this unit.
Note
• You cannot
set this parameter if [Enable IEEE802.1X] is set to
[Yes] (KX-UT248 only).
Value Range 1–4094
Default Value 2
Configuration File Reference VLAN_ID_IP_PHONE (Page 196)
IP Phone (Priority)
Description Selects the priority number for the unit.
Note
• You cannot
set this parameter if [Enable IEEE802.1X] is set to
[Yes] (KX-UT248 only).
Value Range 0–7
Default Value 7
Configuration File Reference VLAN_PRI_IP_PHONE (Page 197)
PC (VLAN ID) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description Specifies the VLAN ID for the PC.
Note
• You cannot set this parameter if [Enable IEEE802.1X] is set to
[Yes] (KX-UT248 only).
Value Range 1–4094
Default Value 1
Configuration File Reference VLAN_ID_PC (Page 197)
PC (Priority) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description Selects the priority number for the PC.
Note
• You cannot
set this parameter if [Enable IEEE802.1X] is set to
[Yes] (KX-UT248 only).
Value Range 0–7
Default Value 0
Document Version 2013-03 Administrator Guide 85
4.3.2 Ethernet Port Settings