Panasonic KX-UT123

Value Range
• Yes
• No
Default Value Yes
Configuration File Reference FIRM_UPGRADE_ENABLE (Page 177)
Update Type
Description Selects whether to display a confirmation message asking the user to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
• Changing this setting may require restarting the unit.
Value Range
• Automatic
• Manual
Default Value Automatic
Configuration File Reference FIRM_UPGRADE_AUTO (Page 178)
Firmware File URL
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
• Changing this setting may require restarting the unit.
Value Range Max. 500 characters
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH (Page 178)
4.7.2 Local Firmware Update
This screen allows you to manually update the unit’s firmware from a PC by clicking [Update Firmware]
.
Document Version 2013-03 Administrator Guide 147
4.7.2 Local Firmware Update