Panasonic KX-UT123

HOLD_ALARM_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of the hold alarm.
Value Range -24–6
Default Value 0
HOLD_ALARM_RPT
Value Format Integer
Description Specifies whether the hold alarm is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 1
HOLD_ALARM_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of the hold alarm using up to 10
whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 120,14880
CW_TONE1_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone
frequencies,
in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 425
CW_TONE1_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of call waiting tone 1.
218 Administrator Guide Document Version 2013-03
5.5.2 Tone Settings