Panasonic KX-UT123

Description Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
• This setting
is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in a
configuration file.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Default Gateway (Page 80)
USER_DNS1_ADDR
Value Format String
Description Specifies the IP address of the primary DNS server.
Note
• This setting
is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference DNS1 (Page 80)
USER_DNS2_ADDR
Value Format String
Description Specifies the IP address of the secondary DNS server.
Note
• This setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference DNS2 (Page 81)
194 Administrator Guide Document Version 2013-03
5.4.1 IP Settings