Panasonic KX-UT123

Description Specifies whether to assign the IP address automatically (DHCP) or
manually (static).
Note
• This setting is available only when "NW_SETTING_ENABLE" is
set to "
N".
Value Range
• 1 (DHCP)
• 0 (Static)
Default Value 1
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Connection Mode (Page 78)
HOST_NAME
Value Format String
Description Specifies the host name for the unit to send to the DHCP server.
Note
• This setting is available only when "CONNECTION_TYPE" is set
to "1".
Value Range Max. 63 characters
Note
• An empty string is not allowed.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value {MODEL}
Web User Interface Reference Host Name (Page 78)
DHCP_DNS_ENABLE
Value Format Boolean
Description Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
• This setting
is available only when "CONNECTION_TYPE" is set
to "1" and when "NW_SETTING_ENABLE" is set to "N".
Value Range
• Y (Use "USER_DNS1_ADDR" or, "USER_DNS1_ADDR" and
"USER_DNS2_ADDR")
• N (Receive DNS server address automatically)
Default Value
N
192 Administrator Guide Document Version 2013-03
5.4.1 IP Settings