Panasonic KX-UT123

Value Range -24–6
Default Value 0
CW_TONE1_RPT
Value Format Integer
Description Specifies whether call waiting tone 1 is repeated.
Value Range 0–1
– 0: No Repeat
– 1: Repeat
Default Value 1
CW_TONE1_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of call waiting tone 1 using up to
10 whole numbers (on 1, off 1, on 2, off 2…) separated by commas.
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 120,120,120,120,120,14400
HOLD_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of the hold tone using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 425
HOLD_TONE_GAIN
Value Format Integer
Description Specifies the gain, in decibels, of the hold tone.
Value Range -24–6
Default Value 0
Document Version 2013-03 Administrator Guide 219
5.5.2 Tone Settings