Panasonic KX-UT123

Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
HTTP Client
Settings
HTTP Client Settings HTTP Version
*4
ü
Page 88
HTTP User Agent
*4
ü
Page 88
HTTP Authentication Authentication ID
ü ü
Page 89
Authentication Password
ü ü
Page 89
Proxy Server Settings Enable Proxy
ü
Page 89
Proxy Server Address
ü
Page 90
Proxy Server Port
ü
Page 90
Global Address
Detection
Global Address
Detection
Detection Method
ü
Page 90
Detection Interval
ü
Page 91
STUN Server STUN Server Address
*4
ü
Page 91
STUN Server Port
*4
ü
Page 91
Static NAPT
Settings
Global IP Address Global IP Address
ü
Page 92
Enable Global IP
Address Usage per Line
Line 1–Line x
ü
Page 93
External RTP Port Channel 1–25
ü
Page 93
Application
Settings
Application Settings Application Port
*4
ü
Page 94
Enable Application
*4
ü
Page 94
Application
Authentication
Authentication ID
*4
ü
Page 94
Authentication Password
*4
ü
Page 95
*1
The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2
This setting can also be configured through other programming methods (phone user interface programming or configuration file
programming).
*3
If your phone system dealer does not allow you these settings, you cannot change them even though the unit shows the setting menu.
Contact your phone system dealer for further information.
*4
This setting can also be configured through configuration file programming.
*5
This setting can also be configured through phone user interface programming.
System
Menu Item Section Title Setting
Access
Level
*1
Ref.
U A
Web Language Web Language Language
ü ü
Page 95
Document Version 2013-03 Administrator Guide 63
4.1 Web User Interface Setting List