Panasonic KX-UT123

Value Range Max. 500 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>".
– "<user>" must be less than 128 characters.
– "<password>" must be less than 128 characters.
– "<user>:<password>@" may be empty.
– The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
– ":<port>" can be omitted if you do not need to specify the
port number.
• If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower
-case.
• If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this URL, it will be replaced with
"FIRM_VERSION" depending on the system. Note that this rule
differs from other parameters such as "SIP_USER_AGENT".
Default Value Empty string
Web User Interface Reference Firmware File URL (Page 147)
5.3.5 Provisioning Settings
OPTION66_ENABLE
Value Format Boolean
Description Specifies whether to enable the unit to look for option 66 to receive the
TFTP server address or FQDN from the DHCP server.
Note
• The unit will try to download configuration files through the
TFTP server, the IP address or FQDN of which is specified in
the option number 66 field.
Value Range
• Y (Enable option 66)
• N (Disable option 66)
Default Value
Y
OPTION66_REBOOT
Value Format Boolean
Description Specifies whether the unit restarts automatically after pre-provisioning
has completed
successfully using DHCP server option 66. For details,
see 2.1.4 Pre-provisioning Setting Example.
Document Version 2013-03 Administrator Guide 179
5.3.5 Provisioning Settings