Tone Timings
Description Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
• It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Default Value 60,250,190
Note
• Avoid setting 1–50 for any of the values.
Configuration File Reference REORDER_TONE_TIMING (Page 216)
4.6.5 Telephone Settings
This screen allows you to configure various telephone settings.
4.6.5.1 Telephone Settings
Key Click Tone
Description Selects whether a tone is heard in response to key presses.
Value Range
• Yes
• No
Default Value Yes
Configuration File Reference KEY_PAD_TONE (Page 210)
140 Administrator Guide Document Version 2013-03
4.6.5 Telephone Settings
To Next Page
Loading...
