CODEC_G729_PARAM
Value Format Integer
Description Specifies whether to add an attribute line, "a=fmtp:18 annexb=no", to
SDP when the codec is set to "G729A".
Value Range
• 0 (Do not add "a=fmtp:18 annexb=no
")
• 1 (Add "a=fmtp:18 annexb=no
")
Default Value 0
CODEC_ENABLEx_n
Parameter Name Example CODEC_ENABLEx_1, CODEC_ENABLEx_2
, …, CODEC_ENABLEx_6
Value Format Boolean
Description Specifies whether to enable the codec specified in the parameter list.
Note
• The "x" character in the parameter title should be changed to
one of the following numbers, according to the codec to be
changed.
– 0: G.722
– 1: PCMA
– 2: G.726-32
– 3: G.729A
– 4: PCMU
• For codec setting examples, see 2.5.1 Examples of Codec
Settings.
Value Range
• Y (Enable)
• N (Disable)
Default Value
Y
Web User Interface Reference
• G722 (Enable) (Page
120)
• PCMA (Enable) (Page 121
)
• G726–32 (Enable) (Page 121)
• G729A (Enable) (Page 121)
• PCMU (Enable) (Page 122)
CODEC_PRIORITYx_n
Parameter Name Example CODEC_PRIORITYx_1, CODEC_PRIORITYx
_2, …,
CODEC_PRIORITYx
_6
Value Format Integer
234 Administrator Guide Document Version 2013-03
5.6.1 Codec Settings
To Next Page
Loading...
