4.6.4.4 Stutter Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that
a voice mail is waiting, using 2 whole numbers separated by
a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 350,440
Configuration File Reference DIAL_TONE4_FRQ (Page 213)
Tone Timings
Description Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice
mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2…) separated by commas.
Note
• It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range 0–16000 (0: Infinite time)
Note
• Avoid setting 1–50 for any of the values.
Default Value 560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Configuration File Reference DIAL_TONE4_TIMING (Page 214)
4.6.4.5 Reorder Tone
Tone Frequencies
Description Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range 0, 200–2000 (0: No tone)
Default Value 480,620
Configuration File Reference REORDER_TONE_FRQ (Page 215)
Document Version 2013-03 Administrator Guide 139
4.6.4 Tone Settings
To Next Page
Loading...
