Description Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
• This setting is available only when "VLAN_ENABLE" is set to
"
N".
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication ID (Page 87)
IEEE8021X_USER_PASS
Value Format String
Description Specifies the authentication password used for IEEE 802.1X
authentication.
Note
• This setting is available only when "VLAN_ENABLE" is set to
"
N".
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Empty string
Web User Interface Reference Authentication Password (Page 87)
5.4.5 HTTP Settings
HTTPD_PORTOPEN_AUTO
Value Format Boolean
Description Specifies whether the unit’s Web port is always open.
Value Range
• Y (Web port is always open)
• N (Web port is closed [can be opened temporarily through phone
user interface programming])
Notice
• If you
want to set to "Y", please fully recognize the possibility of
unauthorized access to the unit through the Web user interface
and change this setting at your own risk. In addition, please take
full security measures for connecting to an external network and
control all passwords for logging in to the Web user interface.
Default Value
N
Document Version 2013-03 Administrator Guide 199
5.4.5 HTTP Settings
To Next Page
Loading...
