Panasonic KX-UT123

4.3.3.2 IEEE802.1X Authentication
Authentication Protocol
Description Specifies the authentication method used with the IEEE 802.1X
protocol.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range
• EAP-MD5
• PEAP
Default Value EAP-MD5
Configuration File Reference IEEE8021X_AUTH_PRTCL (Page 198)
Authentication ID
Description Specifies the authentication ID required for IEEE 802.1X
authentication.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_ID (Page 198)
Authentication Password
Description Specifies the authentication password used for IEEE 802.1X
authentication.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_PASS (Page 199)
Document Version 2013-03 Administrator Guide 87
4.3.3 IEEE802.1X Settings (KX-UT248 only)