Panasonic KX-UT123

Value Range
• Y (Enable periodic synchronization of configuration files)
• N (Disable periodic synchronization of configuration files)
Default Value
N
Web User Interface Reference Cyclic Auto Resync (Page 150)
CFG_CYCLIC_INTVL
Value Format Integer
Description Specifies the interval, in minutes, between periodic checks for updates
of the configuration files.
Value Range 1–40320
Default Value 10080
Web User Interface Reference Resync Interval (Page 151)
CFG_RTRY_INTVL
Value Format Integer
Description Specifies the period of time, in minutes, that the unit will retry checking
for an update of the configuration files after a configuration file access
error has occurred.
Note
• This setting
is available only when "CFG_CYCLIC" is set to "Y".
Value Range 1–1440
Default Value 30
CFG_RESYNC_TIME
Value Format String
Description Specifies the time (hour:minute) that the unit checks for updates of
configuration files.
Value Range 00:00–23:59
Note
• If the
value for this setting is any valid value other than an empty
string, the unit downloads the configuration files at the fixed
time, and the settings specified in "CFG_CYCLIC",
"CFG_CYCLIC_INTVL", and "CFG_RTRY_INTVL" are
disabled.
• If the value for this setting is an empty string, downloading the
configuration files at the fixed time are disabled.
Default Value Empty string
Document Version 2013-03 Administrator Guide 185
5.3.5 Provisioning Settings