Chapter 7
I/O Port
I/O Port Functions VII - 33
7.3 I/O Port Functions
Each I/O can be used as a general purpose port, which is controlled with PnOUT, PnIN, PnDIR, PnPLU, PnODC
and PnNLC registers. Each port also has a special function, the detail of which is described after [7.4 Port 0].
..
The assignment and selection of LCD control pins (SEGn and COMn) differ in each product.
For details, refer to [Table:1.2.3 Functions of LCD Control] and [17.2.2 LCD Port Control Reg-
isters].
MN101LR05D is described in this section.
..
To Next Page
Loading...
