Panasonic MN101L Series

Chapter 19
On-Board Debugger
List of on-board debugging functions XIX - 3
19.2 List of on-board debugging functions
Table:19.2.1 List of on-board debugging functions
..
Refer to DebugFactory Builder for MN101 help for details of debugging functions
..
On-board Debugging Functions Descriptions
Support or Not
(number of
support channels )
Execution
Single step
execution
Step execution as a source line or a unit of assembler Supported
Functional step
execution
Step execution which a subroutine is defined as 1 step Supported
Program execution Basic execution Supported
Microcomputer reset Reset for Microcomputer Supported
Data display
(change)
Dump Dump display of memory Supported
Edit Edit memory to specified value Supported
Watch
Display memory in a specified format when the program is running
User program has possible to abort during access, so the real-time
performance slows down little
Supported
Inspect Display according to a data structure of specified variable Supported
Display/Change register Display and change the specified register Supported
RAM monitor function
Display memory when the program is running
User program has possible to abort during access, so the real-time
performance slows down little
Supported
Back trace function
Execute the back trace of stack frames and display the progress of
function call
Supported
Event Factor
Effective address Define address and range
Supported
( 1 channel )
Data access
Define access type (R/W), data size(1/2 bytes), data, data mask, range
and NOT
Break
Forced Forced break
Stop execution forcibly by pressing the escape key or by clicking stop
icon of GUI
Supported
Software
Software break Replacement specified address instruction with break instruction Supported
Instruction break Software break to ROM area
Supported
( 2 channels )
Hardware
Execution address
break
Define address and range Supported
Data access break
Define access type (R/W), data size(1/2 bytes), data, data mask, range
and NOT
Supported
Malfunction
detection
Support
Unimplemented
instruction break
Break by execution of unimplemented instruction Supported
Profile function
Function use
frequency
measurement
Measure the frequency of subroutine (function) execution Supported
non-intrusive functions
Break setting, memory reference and changing, trace setting and display
during program is executing.
The real-time performance slows down little by RAM monitor or Watch
Supported
On-board programming
On-board programming to embedded non-volatile memory by using the
function of On-board debug
Supported