Panasonic MN101L Series

Chapter 10
General-Purpose Time Base/Free-Running Timer
Control Registers X - 5
10.2.2 Programmable Timer Registers
The timer 6 is a 8-bit programmable counter.
Programmable counter consists of compare register (TM6OC) and binary counter (TM6BC).
Binary counter is a 8-bit up-counter. When the TM6CLRS bit of the timer 6 mode register (TM6MD) is "0" and
the interrupt cycle data is written to the compare register (TM6OC), the timer 6 binary counter (TM6BC) is
cleared to 0x00.
 Timer 6 Binary Counter (TM6BC:0x03F78)
 Timer 6 Compare Register (TM6OC:0x03F79)
The time base timer can be reset by the software. The time base timer can be cleared by writing an arbitrary value
to the time base timer clear control register (TBCLR).
 Time Base Timer Clear Control Register (TBCLR:0x03F7B)
bp 76543210
Bit name TM6BC7 TM6BC6 TM6BC5 TM6BC4 TM6BC3 TM6BC2 TM6BC1 TM6BC0
At reset00000000
AccessRRRRRRRR
bp 76543210
Bit name TM6OC7 TM6OC6 TM6OC5 TM6OC4 TM6OC3 TM6OC2 TM6OC1 TM6OC0
At resetXXXXXXXX
Access R/W R/W R/W R/W R/W R/W R/W R/W
bp 76543210
Bit name TBCLR7 TBCLR6 TBCLR5 TBCLR4 TBCLR3 TBCLR2 TBCLR1 TBCLR0
At reset--------
AccessWWWWWWWW