Panasonic MN101L Series

Chapter 18
ReRAM
XVIII - 4 Self-programming Rewriting Method
18.2 Self-programming Rewriting Method
Self-programming allows the ReRAM data programming by setting the FBEWER to "0x4B" and using software
libraries in the ReRAM reserved area.
Figure:18.2.1 Memory Map in Self-programming Rewriting Method
..
When Self-Programming can not be performed because of program troubles, which may
happen in an early phase of development, program the data of ReRAM with Programmer
writing method.
..
0x03D82
0x03D87
0x04000
0x04100
0x04900
0x13FFF
Address
(Access Disabled)
Registers for
Programming
Data Area
2 KB
Program Area
61.75 KB
Reserved Area
0x6F000
0x6FBFF
Rewritable
Area
Program Area
256 B
(Access Disabled)
Address MAP (FBEWER = "0x4B")
0x03D82
0x03D87
0x04000
0x04100
0x04900
0x13FFF
Address
Access Disabled
Data Area
2 KB
Program Area
61.75 KB
Program Area
256 B
(Access Disabled)
Address MAP (FBEWER ≠ "0x4B")