Particle Measuring Systems LASAIR II 310 User Manual

Printing a Statistics Report
Lasair II Particle Counter Operations Manual Page 8-25
Invalid Sample Data
NOTE: Invalid data are not used in calculations.
However, they are saved with the other sample records.
23a
INVALID (or
VALID)
The condition of the data: VALID, INVALID, or INCOMPLETE.
A sample is made invalid by one of the following conditions:
• The user has marked the sample invalid in the Sample
Acknowledge mode
• A pump error has occurred.
• A laser error has occurred.
23b
2000/11/16
The date of the last sample
23c
14:07:06
The time of the last sample (hour:minute:second)
24a
#002
The name or number of the area that was being sampled when an
error occurred
24b
Alarm:Pump
(or Laser)
The type of error detected by the Lasair II particle counter

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English