Particle Measuring Systems LASAIR II 310 User Manual

Page 6-4 Lasair II Particle Counter Operations Manual
Chapter 6: Operation
When the Data Table Screen is displayed, you may view all the stored data,
displayed in the order received, or you can select, sort, and order the stored data
according to your needs.
Navigating in the Data Table Screen
The Data Table Screen (see above) displays all stored particle and analog data, or
the subset of the data you select to view. To enable the table’s navigation mode,
press the Enter softkey.
In the edit mode, press the left or right arrow softkeys to move to columns
that are not visible on the screen.
Use the -10, +10, -50, and +50 softkeys to move up or down the data record
columns in blocks of 10 or 50 records, or use the up and down arrows to move one
record at a time.
Figure 6-2: Data Table Screen
Row index

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English