Particle Measuring Systems LASAIR II 310 User Manual

Page 6-2 Lasair II Particle Counter Operations Manual
Chapter 6: Operation
Viewing Sample Data
Sample data can be viewed on the following two screens:
• Main Display Screen
• Data Table Screen
Viewing Data on the Main Display Screen
The Main Display Screen displays data collected from the last sample. Data
remains on the screen until a new sample is started. The data on this screen is
preserved and stored in the Lasair II particle counter’s memory. The newly created
data can be printed if you choose that option.
Viewing Data on the Data Table Screen
Data stored in the Lasair II particle counter can be viewed on the Data Table Screen.
If no filter parameters have been set, all stored data will be available for review in
the Data Table Screen.
You can also determine which of the sample data are displayed and the order in
which they are displayed. the Data Table Screen automatically updates each time a
new sample is completed.You can print displayed data if you wish.
NOTE: Automatic display of newly created data does not work while
the printer is being used.
To view stored sample data:
1 From the Main Display Screen, open the Status/Information Screen by
pressing the Status/Information icon’s softkey.
The Status/Information Screen will open.

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English