Particle Measuring Systems LASAIR II 310 User Manual

Location Name Setup Screen
Lasair II Particle Counter Operations Manual Page 5-11
List of location names The location names that have been entered individually or
automatically.
001....N Generates a list of locations numbered from 1 to 100. This option works
only if no other names have been entered.
Erase All Allows you to delete all entered locations in the list at once.
Location Softkeys Opens setup menus to edit, add, or delete locations.
To Add a location name:
1 From the Location Name Setup screen, press the Add Location softkey. The
Add Location Screen will be displayed:
NOTE: If an existing location name was highlighted when you
pressed the Add Location softkey, that location name will appear in
the Add Location name field.
2
Using the editing softkeys and directional arrow buttons on the control panel,
enter the location name.
3 When editing is completed, press the Enter button on the control panel to
highlight the
OK button.
4 Press the Enter button again to save the new location name.
To Edit a location name:
1 In the Location Name Setup screen, highlight the location name to be edited.
Figure 5-5: Add Location Screen

Particle Measuring Systems LASAIR II 310 Specifications

General

Brand	Particle Measuring Systems
Model	LASAIR II 310
Category	Measuring Instruments
Language	English