Page 6-12 Lasair II Particle Counter Operations Manual
Chapter 6: Operation
Start: xx the index number of the record you have scrolled to (or 1 if you haven’t
scrolled through the records at all). See “Viewing Data on the Data Table Screen”
on page 6-2. The number in the Start field is the first record that will be printed.
Num the number of records that will be printed.
Prints the records you have chosen.
Prints the records you have chosen and then averages them.
NOTE:
As many as 100 records can be printed.
2
Assuming that you want to print more records than the first one, press the
Tab Forward icon softkey as needed to advance to the field you want to
change.
3 Press the Up Arrow or Down Arrow softkeys to change the Start field and the
Number fields.
Figure 6-6: Data Table Screen with Print Dialog Box
The number of records that will be printed or
averaged, starting with the “Start” number.
The index number of the first record
that will be printed or averaged
Prints each of the
specified samples
Prints the average of the
selected samples
Minimum: 2
Maximum: 100
To Next Page
Loading...
Need help?
General
