Viewing Sample Data
Lasair II Particle Counter Operations Manual Page 6-13
NOTE:
Remember, you are always changing the digit to the right of
the flashing cursor. This means that if you want a multi-digit number,
you must use the Right Arrow softkey to move the cursor past the first
digit before setting the
second digit. Also, use the softkey to delete a number to the left
of the
cursor, and use the softkey to insert a zero between two digits.
4
When the Start and Number digits are correct, use the Tab Forward softkey to
advance to either the Print Records button or the Print Average button. Press the
Enter softkey to select the option of your choice.
5 Navigate to the OK button and press the Enter key to enable OK.
The printer will begin printing the records on the Data Table Screen. The Abort
Screen will display Hit Cancel to Abort, allowing you an opportunity to abort the
print job before it completes. Press the Enter key to abort the print job.
NOTE:
After pressing the Enter key about seven records will still be
printed.
To interpret the printed data, see “Printer Output” on the next page.
To Next Page
Loading...
Need help?
General
