Penlon Prima 460 - Page 129

Prma 460 121 User Manual
6 Alarms
Alarm Priority Mute time
Agent Expiratory % High High 120
Agent Expiratory % Low High 120
Gas Bench O Error - sensor error (ISA OR+ only) High 120
O out of range (ISA OR+ only) High 120
Agent Error High 120
Gas Bench Ambient Pressure Error High 120
Check Pressure Sensing High 120
CO Inspiratory % High Medium 120
CO Expiratory % High Medium 120
Agent Inspire High Medium 120
Mixed Agent and minimum alveolar concentration
(MAC) >= 3
Medium 120
NO Inspiratory % High Medium 120
Agent Inspiratory %Low Medium 120
NO Inspiratory% Low Medium 120
Gas Bench: Sampling line clogged Medium 120
Gas Bench : No Sampling Line Medium 120
Gas Bench: O sampling line clogged (ISA OR+
only)
Medium 120
Rate or Ratio Error Medium 120
Flowmeter Fault Medium 120
CO: out of Range Medium 120
Agent: out of Range Medium 120
NO: out of Range Medium 120
Zeroing Required Medium 120
O Span Calibration Required (ISA OR+ only) Medium 120
Latest Span Calibration Command Failed Medium 120
Gas Bench Comms Error Medium 120
Gas Bench Software (SW) Error Medium 120
Gas Bench Hardware (HW) Error Medium 120
Gas Bench Motor Failure Medium 120
Gas Bench UNCAL Medium 120
Gas Bench Temp Error Medium 120
Mixed Agent / minimum alveolar concentration < 3 Low 0
Appendix 7