PoolCop Evolution - PoolCop Evolution Components; Valve Performance Curves

P a g e | 110 P o o l C o p M a n u a l : V 4 2 EN
www.poolcop.com PCFR
7.1 POOLCOP EVOLUTION
Components
1.5” SG
2.0” SG
Valve Data Unit (VDU)
1
1
pH Sensor Housing
Supplied
Supplied
Control Connection Unit (CCU)
1
1
Control Connection Unit Protection
IP54
IP54
PoolCop Base Gasket
1
1
Long Allen screws, nuts and washers
2
2
Short Allen screws, nuts and washers
4
4
Diffuser with moulded gasket 1.5
1
-
Diffuser with moulded gasket 2.0
-
1
Adapter 2"
-
1
Allen screws
-
6
PoolCop Installer and User Guide
1
1
Technical Specifications
Power Supply
230VAC, 50Hz
230VAC, 50Hz
Current (Primary)
150mA
150mA
Current (Secondary)
2A
2A
Battery 12V SLA
YUASA Y1.2-12FR
YUASA Y1.2-12FR
1 x Pump + 7 Auxiliaries
6A - 230VAC
6A - 230VAC
Communications Port
RS 232
RS 232
Temperature Sensor
0 - 45°C
0 - 45°C
pH Sensor
6.2 – 8.2
6.2 – 8.2
ORP Sensors
0 - 999mv
0 - 999mv
Pressure
0 - 250kPa
0 - 250kPa
Safety Features:
Loss of power supply AC (battery 12V SLA); no water; low pressure; high pressure; lightning protection
Conformity
CE, including Low Voltage Directive (LVD)
7.2 VALVE PERFORMANCE CURVES
0.000
0.100
0.200
0.300
0.400
0.500
0.600
0.700
0.800
0.900
1.000
5 10 15 20 25 30 35
HEAD LOSS (BAR)
FLOW (M3/H)
VALVES PERFORMANCE CURVES
1.5" 2.0"