PoolCop Evolution - Factory Settings

P a g e | 98 P o o l C o p M a n u a l : V 4 2 EN
www.poolcop.com PCFR
Factory Settings
Besides the described settings
below, displays the firmware
version which may be required
for support
FAC T OR Y SETTING S
V42.0 B0
>
Network
Date/Time
Language
: EN
Factory reset
: NO
S E L E C T
QUIT
Network Menu
Network:
NE TW O RK
MC
:02:11:40:00:0B:C9
IP
:192.168.1.77
MSK:
:255.255.255.0
DNS
:192.168.1.1
GTW
:192.168.1.1
SVR
:195.14.0.21
S E L E C T
QUIT
MC: is the MAC address, you will need this information to declare your PoolCop on the PoolCopilot Server.
IP: is the IP address of PoolCop on the local network.
MSK: is the subnet mask
DNS: is the IP address of the Domain Name Server.
GTW: is the IP address of the gateway (router) on the local network.
SVR: if the IP address of PoolCopilot.com server
Time/Date Menu
Set Time and Date
TIM E / D A TE
08:12:45
12/11/2014
Wed
S E L E C T
QUIT
5.6.5.2.1 Setting Time
Set and adjust system Time.
PoolCop does not adjust for daylight saving (unless connected to the PoolCopilot
server).
Text: Time
Entries: 24h
5.6.5.2.2 Setting Date
Set and adjust system Date.
PoolCop does not adjust for daylight saving (unless connected to the PoolCopilot
server).
Text: Date
Entries: dd/mm/yyyy