P a g e | 80 P o o l C o p M a n u a l : V 4 2 EN
www.poolcop.com PCFR
NOTE:
The first time ECO+ mode is selected, the duration of Cycle 2 will default to 8 hours. Once the filtration has
run for approximately 10 minutes an accurate measurement of pool water temperature will enable your
PoolCop to update the filtration duration.
When available, filtration timer Cycle 1 is used to set fixed duration filtration ON and
OFF times.
If Cycle 1 OFF time falls within Cycle 2 duration, the filtration will not stop but
continue until the end of Cycle 2.
Text: Cycle 1
Default: 00:00-00:00
Entries: 00:00-23:59
When available, filtration timer Cycle 2 is used to set fixed duration filtration ON and
OFF times.
If Cycle 2 OFF time falls within Cycle 2 duration, the filtration will not stop but
continue until the end of Cycle 1.
Text: Cycle 2
Default: 00:00-00:00
Entries: 00:00-23:59
To Next Page
Loading...