ComBricks User Manual v6.4.0 | January 18| © PROCENTEC 153/219
16 SNMP
The Headstation has a powerful feature, SNMP, available free of charge in every Headstation version.
With SNMP you can retrieve any data via Ethernet that has been collected by the ComBricks system. This SNMP
data can be used by network management tools or SCADA systems to visualize the collected data.
This data ranges from Bargraph data (voltages) to statistics and Live List information. You can also retrieve the
Headstation temperature or power consumption for example. This turns a SCADA system into a versatile
monitoring or alarming station.
The SNMP MIB (Management Information Base) file, which is available for download on our website, contains
the descriptions for all items. This MIB file should be used in a management tool or MIB viewer to retrieve the
data from ComBricks.
16.1 List of data items
The following items can be retrieved with SNMPv1 from the ComBricks:
General items
• Serial number of the Headstation
• Firmware version of the Headstation
• Hardware version of the Headstation
• Backplane version
• FPGA version of the Headstation
• General description of the Headstation
Ethernet status
• MAC address
• IP address
• Subnet mask
• Default gateway
• DNS address
• DHCP state
Device
• System time
• System temperature
• System current
• System voltage
• System status
• System I/O status
• Micro SD card status
• License code
• Number of modules
• Module info
To Next Page
Loading...
General