ComBricks User Manual v6.4.0 | January 18| © PROCENTEC 52/219
4.8.3 External protocols
The following login information is required for external protocols, for example for FTP and TELNET.
Any FTP client can be used to setup the FTP connection. ComBricks uses port 21.
If you have not set a password, ComBricks will accept any password during the connection phase. Some FTP
clients require a password, so you can provide any password.
4.8.4 Clearing password(s)
There are 3 ways to restore the password(s) to their default setting:
• Change the passwords with no text written in the text field (Administrator login required).
• Restore to factory default settings in the "Device management" page (Administrator login required).
• Restore to factory default settings with the switch on the front of the Head Station (see Paragraph 6.5).
To Next Page
Loading...
General