ComBricks User Manual v6.4.0 | January 18| © PROCENTEC 19/219
1.5.11 Other applications
• Cross border installations
• Water treatment
• Long commissioning and test cycles
• 24-7 service contracts
1.6 Output control
Relay- and digital output modules can be configured to respond directly to bus problems, such as bus voltage
too low, retries, syncs, master lost, diagnostics, etc.
This offers a multitude of applications to directly and independently act on the machinery when the bus
communication becomes unreliable. Especially when safety, human lives or the environment are at stake.
Power switches, hold switches, indicators, backup systems and LED towers are a few examples of machine
parts that can be hooked up to the relays. ComBricks is the only monitoring product that has the capability to
respond directly on the hardware with multiple relays.
• The Head Station already contains 1 relay.
• The relays can also be configured to be switched manually or on time.
24 55 834
2 3
Segment 2
Segment 1
Power switches, Hold switches,
Indicators, Backup systems,
Device I/O, Doors,
LED towers, etc.
Retries
Syncs
Bus voltage low
Lost
Diagnostics
Repeaters I/O
To Next Page
Loading...