ComBricks User Manual v6.4.0 | January 18| © PROCENTEC 150/219
15.4 Activating the OPC server
After setting up the OPC tags, the server has to be activated.
The OPC server settings can be found in the Settings menu (see Fig. 107).
In the next dialog the server can be added (see Fig. 108).
A maximum of 16 servers can be created, each with its own tag groups.
Tags which are already available
(Live List, Statistics, etc.)
Adding a variable tag
pointing to slave data
Save Tag Data when ready
(also during operation)
Confirm the
settings