4.3 Start-up Procedures
126 SIEPYEUOQ2A01G AC Drive Q2A Technical Manual
4.3 Start-up Procedures
This section gives the basic steps necessary to start up the drive.
Use the flowcharts in this section to find the most applicable start-up method for your application.
This section gives information about only the most basic settings.
◆ Flowchart A: Connect and Run the Motor with Minimum Setting Changes
Flowchart A shows a basic start-up sequence to connect and run a motor with a minimum of setting changes.
Settings can change when the application changes.
Use the drive default parameter settings for basic applications where high precision is not necessary.
Figure 4.3 Basic Steps before Startup
To Next Page
Loading...
Need help?
General